Last Modified: 11-29-2007 1.6 A
Service Category: Vehicle Exterior Section: Exterior Panels/Trim
Model Year: 2008 Model: Sequoia Doc ID: RM000003HZM000X
Title: EXTERIOR PANELS / TRIM: BACK DOOR BELT MOULDING: REMOVAL (2008 Sequoia)

REMOVAL

1. REMOVE BACK DOOR OUTSIDE MOULDING LH WINDOW / GLASS: BACK DOOR POWER WINDOW MOTOR: REMOVAL (2008 Sequoia)+

2. REMOVE BACK DOOR OUTSIDE MOULDING RH WINDOW / GLASS: BACK DOOR POWER WINDOW MOTOR: REMOVAL (2008 Sequoia)+

3. REMOVE LINEAR WIPER STEP RH DOOR / HATCH: BACK DOOR: DISASSEMBLY (2008 Sequoia)+

4. REMOVE BACK DOOR GLASS OUTER WEATHERSTRIP ASSEMBLY

(a) Apply protective tape to the door panel in the area around the back door glass outer weatherstrip.

(b) Using a moulding remover, disengage the 9 claws and remove the back door glass outer weatherstrip.